4″ in WIDE 3D Printing LOW TEMP Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE 3D Printer bed grip deck cover EZ Easy Print Removal 60 Yd 4″ Inch

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape features a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days. Heat from prints will greatly affect this however!

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

Very Important: Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

220x220mm Flex Magnetic Print Bed Tape Hot Bed Sticker Build Surface Tape w/Adhesive Backing F/Wanhao i3, ANET A8 A6 Prusa i3 3D Printer

Package:

1piece A + 1piece B sticker

Advantage: 1. use again and again. More money. 2. separation type bending to take the model. It’s more convenient. 3. do not need the beauty of paper and scraper to assist the model. 4. can be installed on a hot bed and a glass platform. 5. print not warped edge. No glue is needed. 6. can be printed on cold bed 7.The A plate is flexible, frosted and magnetic, it is easy to move away from build platform and take away printed models 8. The A B plates are flatness 9.It can print a variety of materials such as PLA and so on.

Product Features

  • Backing: B with 3M backing
  • Size: 220mm x220mm
  • Please level the build plate well before printing
  • Please do not let heated nozzle touch the A plate directly !
  • Because of the material of the product, it is recommended that the temperature of the hot bed should not exceed 80 degrees.

Click Here For More Information

3D Printing Build Surface Tapes 3D Printer Plate Tape 9.8″x8.3″ 30 Sheets

Description:

If you are the 3D printing enthusiasts, you must love this tape

Single sheets make it easy to apply and remove tape from the build plate

Cover your printer bed deck for easy removal of prints and replace tape easily as it wears

Professional grade multi-use contractors tape featuring a specially formulated, high tack adhesive

Works for textured, semi-rough, or smooth surfaces, ideal for painted walls and trim, woodwork, glass and metal

Specification:

Color: blue

Dimension: 9.8″x8.3″ L x W

Number of Items: packages of 30 sheets

Website URL:

For more information and products, please visit: www.amazon.com/shops/affinityinc

Product Features

  • Perfect tape to use for your 3D printer
  • Easy to apply and remove, doesn’t easily tear
  • Covers most 3D printer print beds with one single piece
  • Removes cleanly without adhesive transfer or surface damage
  • Adheres quickly and easily to a painted walls, trim, wallpaper, glass and wood

Click Here For More Information

Toolcool 50mmx50m 50mm Wide 3D Printer Blue Tape Bed Tape Masking Tape For 3D Printer Parts

Size:50mmX50m
Color:blue
Material:masking tape.

Usage:

This produce is conform to ROHS environmental demand.
Widespread use in shoes,indoor decoration,electric machine,car,the furniture made
of iron or plastic,capacitor and electrics,precise electroplate.
Fit for connection organic silicon material.
Suitable to high temperature ,can up to high temperature 280 degree
Medium temperature can between 80 to 130 degree.

Base material:Masking paper
Thick: 0.14(mm)
Inflict temperature adhesive force N/2.5cm:10-25
Stretch forceN/2.5cm:>90<180
Elongation(%):10-20
Temperature Resistance character:80-280

Package included:
1 x masking tape

Product Features

  • Masking tape is based on the import colorful masked paper.
  • One single face made of coating rubber pressure sensitive adhesive.
  • The other face made of anti-stick material.
  • Process of high temperature resistance,chemical resistance,with good sticky power.
  • The surface is soft and will not leave residue.

Visit The Website For More Information…

Glistco 3D Printer Blue Painters tape 6″ x 108′

Our large 6″ painters tape is a necessary addition for any 3d printer. No longer laying down piece by piece, just unroll once and you’re ready to go. Strong adhesion for your 3D prints, works best with a heated bed. Easy to unroll and work with, the perfect solution for prints that are not sticking properly.

Product Features

  • 6″ Painters Tape
  • Perfect adhesion for your 3D prints
  • Large area removing unsightly lines from your 3d print
  • Strong durable painters tape
  • Sticks extremely well to your printing bed

Click Here For More Information