Kweiny Heat Insulation Cotton and PTFE High Temp Tape for 3D Printer Makerbot Hotend Heater Block | 10PCS Cotton and A Roll of Tape for Extruder Parts Tool Kit

Notice:
1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts;
2. Please do not use flame to test their heat resistance, because the flame’s temperature is much higher than 300 degrees Celsius (572 Fahrenheit ).

Size:
Heat insulation cotton: Length 80mm/3.15in, width 20mm/0.78in, thickness 2mm;
PTFE high temp tape: Total length 10m/32.8ft, width 8mm, thickness 0.13mm

package including:
10PCS heat insulation cotton;
One Roll of PTFE High Temp Tape

Product Features

  • Compatibility: Matches all 3D print extruder heater block offered from E3D Makerbot, MK8 Makerbot RepRap , etc.
  • High temperature resistance: Both PTFE tape and heat insulation cotton, short term resistance to temperature 260 degrees Celsius (500 Fahrenheit ), long term resistance to temperature 300 degrees Celsius (572 Fahrenheit )
  • Function: Keep heater block temperature constant, so that improving the quality of the printed matter, save electricity and prolong the service life of heater and temp sensor
  • Use-method: You can cut cotton into the right size and hole according to your needs, then stick it firmly with PTFE tape. 5 sides of heater can be wrapped up in cotton, except the surface installed heater wire, but you just need to use 1 piece cotton. You can also use PTFE tape to stick any other parts on your 3D printer
  • Material: The heating insulation cotton is made from heat resistant ceramic fiber, the tape is made from PTFE

Visit The Website For More Information…

AUSTOR 3D Printer Tool Kit – 6pcs Extruder 1.75MM Tube, 6pcs 0.4MM Brass Extruder Nozzle Print Heads, 2M PTFE Teflon Tube(2.0mm ID/4.0mm OD) for E3D V6 Makerbot (Bonus: 3pcs Cleaning Drill Bits)


AUSTOR 3D Printer Tool Kit

Specific parameter

Nozzle throat: outer thread: M6; outer diameter: 6mm; inner diameter: 4mm; teflon pipe inner diameter: 2mm; length: 22.5mm; filament diameter: 1.75mm; material: stainless steel.
Brass nozzle: output diameter: 0.4mm; input diameter: 1.75mm; size: 5*13mm; material: brass; color: golden.
PTFE teflon tube: material: PTFE (Poly Tetra Fluoro Ethylene); density: 2.15-2.20g/cm3; heat resistance: up to 260℃; outside diameter: 4mm; inside diameter: 2mm; color: white; length: 2m.
Cleaning drill kit: bit diameter: 0.4mm; bit length: 8mm; length of shank: 20mm; handle material: silicone.

Compatibility
Compatible with all 1.75mm E3D V6 Makerbot 3D printer.

NOTE: small parts, please keep away from baby child.

package including:
6 x 3D Printer nozzle throat
6 x 3D Printer extruder brass nozzle
1 x 2M PTFE teflon tube(2.0mm ID/4.0mm OD)
3 x cleaning drill bits

Product Warranty

Austor Direct Customer Service Team is dedicated to offering our valued customers a great and professional services – Timely email reply, Helpful solutions, Refund & Return Warranty.

All Austor products supply 45 days money-back & 18-month warranty. Any questions you have, please don’t hesitate to contact us. We will get you back within 24hours.

Product Features

  • Package include: 6pcs 3D Printer nozzle throats + 6pcs nozzle print heads + 2M PTFE teflon tube(2.0mm ID/4.0mm OD) + 3pcs cleaning drill bits
  • Compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer
  • Nozzle throat: material: stainless steel; outer thread: M6; inner diameter: 2mm; length: 22.5mm; filament diameter: 1.75mm
  • Extruder brass nozzle: material: copper(brass); size: 5*13mm; output diameter: 0.4mm; input diameter: 1.75mm; color: golden
  • PTFE teflon tube: material: PTFE(Poly Tetra Fluoro Ethylene); length: 2m; outside diameter: 4mm; inside diameter: 2mm; density: 2.15-2.20g/cm3

Click Here If You Need More Detailed Info…

AUSTOR 3D Printer Tool Kit – 6pcs Nozzle Throat, 6pcs 0.4MM Brass Nozzle, 2M PTFE Teflon Tube and 2 Pcs PC4-M6 Fittings for MK8 Makerbot Reprap 3D Printers(Bonus: 3pcs Cleaning Drill Bits)


Austor 3D Printer Tool Kit

Specific parameter

Nozzle throat: material: stainless steel, outer thread: M6, outer diameter: 7mm, inner diameter: 4mm, inner teflon pipe diameter: 2mm, length: 30mm, filament diameter: 1.75mm.
Brass nozzles: input diameter: 1.75mm, output diameter: 0.4mm, size: 5*13mm, material: brass, color: golden.
PTFE teflon tube: outside diameter: 4mm, inside diameter: 2mm, length: 2m, material: PTFE (Poly Tetra Fluoro Ethylene),density: 2.15-2.20g/cm³, heat resistance, up to 260℃, color: White.
PC4-M6 fittings: thread diameter: 6mm; inner diameter(blue end): 4mm, material: copper, plastic.
Cleaning drill bit: bit diameter: 0.4mm, bit length: 8mm, handle material: silicone.

Easy to use
Heat resistance J-head is able to bear greater and stronger impulse but won’t tripping.
Oval release ring turn 360°freely, convenient to disassemble.
Compatible with all 1.75mm PLA ABS 3D printer, work well with Anet A8.

NOTE: small parts, please keep them away from baby child.

package including:
6 x 3D Printer nozzle throat
6 x 3D Printer extruder brass nozzle
1 x 2M PTFE teflon tube(2.0mm ID/4.0mm OD)
2 x PC4-M6 fittings
3 x cleaning drill bits

Product Warranty

Austor Direct Customer Service Team is dedicated to offering our valued customers a great and professional services – Timely email reply, Helpful solutions, Refund & Return Warranty.

All Austor products supply 45 days money-back & 18-month warranty. Any questions you have, please don’t hesitate to contact us. We will get you back within 24hours.

Product Features

  • Package include: 6pcs 3D Printer nozzle throat + 6pcs 0.4mm nozzle + 2m PTFE teflon tube + 2 pcs PC4-M6 fittings + 3pcs cleaning drill bits
  • Applicability and compatibility: for MK8 Makerbot Reprap Prusa I3 3D Printer, compatible with all 1.75mm PLA ABS 3D printer, work well with Anet A8
  • Nozzle throat: material: stainless steel; outer thread: M6; outer diameter: 7mm; inner diameter: 4mm; inner teflon pipe diameter: 2mm; length: 30mm; filament diameter: 1.75mm
  • Brass nozzle: input diameter: 1.75mm; output diameter: 0.4mm; size: 5*13mm; material: brass; color: golden
  • PTFE Teflon Tube: material: PTFE (Poly Tetra Fluoro Ethylene); length: 2m; outside diameter: 4mm; inside diameter: 2mm; density: 2.15-2.20g/cm³

Click Here If You Need More Detailed Info…

Hestya 10 Pieces Drill Bit for 3D Printer, Flexible Stainless Steel Nozzle Cleaning Tool Kit, Diameter Specification 0.2 mm, 0.3 mm, 0.35 mm, 0.4 mm, 0.5 mm


10 Pieces drill bit for 3D printer, flexible stainless steel nozzle cleaning tool kit, diameter specification 0.2 mm, 0.3 mm, 0.35 mm, 0.4 mm, 0.5 mm

Durable to use:
Can use for heaps of times as it is made of stainless steel with good flexibility, not rust or break easily.

Enough quantity:
10 Pieces of nozzle drills in 5 sizes, applicable in your daily life, and they are held in a box, in case of missing.

Compatibility:
Matches most 3D print extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap, etc..

Specifications:
Material: stainless steel
Bit diameter: 0.2 mm, 0.3 mm, 0.35 mm, 0.4 mm, 0.5 mm
The bit length: 2.5 cm, 4 cm, 5 cm, 6 cm, 7.5 cm
The shank length: 2.5 cm, 3 cm, 3 cm, 3 cm, 3 cm
Total length: 5 cm, 7 cm, 8 cm, 9 cm, 10.5 cm

Package included:
10 x Needle drill bits

Product Features

  • Quantity and size: 10 pieces in total, 2 pieces per specification, the needle drill bits have 5 sizes (0.2 mm, 0.3 mm, 0.35 mm, 0.4 mm and 0.5 mm), different sizes can meet your multiple needs
  • Good material: made of stainless steel, flexible and won’t break easily; Comes with a handle, so you can easily twist it during use
  • Wide range of compatibility: compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap, etc.
  • Function: it can be applied to accurately measure the diameter of nozzle holes, you can clean the small size nozzles and other small parts by this tool kit, such as the feed gear
  • Good performance: the drill bits will clean your printer nozzles very well and make it print better

Click Here If You Need More Detailed Info…

WINGONEER 5pcs 0.4mm 3D Printer Drill Bit Nozzle Cleaning Tool Kit

WINGONEER 5pcs 0.4mm 3D Printer Drill Bit Nozzle Cleaning Tool Kit

features:
Material: Stainless Steel.
Adopt new technology and not easy to break.
Affordable and practical solution to blocked nozzles due to dried ABS/PLA filament.
Compatible with most well known 3D Printers on the market (e.g. Duplicator, MakerBot, RepRap etc.).

Specifications:
Material: Stainless Steel.
Size:0.4mm cleaning needle

Package Included:
5 x WINGONEER 0.4mm 3D Printer Drill Bit Nozzle Cleaning Tool Kit

Product Features

  • Material: Stainless Steel.
  • Adopt new technology and not easy to break.
  • Affordable and practical solution to blocked nozzles due to dried ABS/PLA filament.
  • Compatible with most well known 3D Printers on the market (e.g. Duplicator, MakerBot, RepRap etc.).

Click Here If You Need More Detailed Info…