Heat Bed Mosfet, MACTISICAL 2 Pack 3D Printer Heat Bed Power Module 3D Printer Board Expansion Board MOS Tube High Current Load Module

100% Brand new and Premium Professional Grade MACTISICAL 3D Printer Hot Bed Power Expansion Board .

This module is based on power mosfet and will allow PID control of the heated bed (DC-DC Relays usually do not allow this).

According to the thermal power of the bed, please choose the matching power supply, with sufficient margin. High-Power heated bed is recommended to use 24V power supply,under the same power requirements, the current is smaller than 12V.

Specification
Color: Black, cable length: 6 inch
Net Weight: 75g(approx.)
Size: 2.36″ x 1.97″ x 1.2″ / 60mm x 50mm x 30mm
Mounting Holes: D=3.2MM For M3 Screws.

Notice:
Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working.

Package Content:
2*Heat bed Power Module with 2 connection cables

Support
Please do not hesitate to contact us if there’s any problem or question about our products. We will keep improving our products and service, and try our best to meet customers’ needs. Thank you for supporting MACTISICAL.

Product Features

  • ★ WELL MADE- New material with superior quality stainless, High-grade Aluminum block for best connectivity and long life.
  • ★ HIGH TRANSMISSION – With this addon module to your 3D printer motherboard you can lead the maximum current up to 25A.
  • ★ MULTIFUNCTION – Completely solve the hot bed power is too large and load current problems,and can well protect the connectors on the controller board from overheating.
  • ★ MEET YOUR NEEDS -Widely used for common 3D printer models,extruder and other open 3D printer motherboards.such as Anet A8, etc.
  • ★ WARNING – For use on some devices (for example,Anet A8),you need to make sure the power supply is set to 110 volts instead of the default 220 volts.If the voltage is too high, the product will get super hot, even charred!! Don’t touch it lightly.

Click Here For More Information

Heat Bed Power Module, 2-Pack 3D Printer Hot Bed Power Expansion Board/Heatbed Power Module/MOS Tube High Current Load Module with Cables

Heated Bed Power Module Features:
Helps 3D printer equipped with the controller board (capable of max 15A) become more powerful.
With this add-on module to board lead the maximum current up to 25A.
If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)

Specifications:
Color: Black
Max Current: 25A (Enhance heat dissipation)

Note:
1.This module under the premise of normal cooling, found at I (Max) = 25A stable work situation, the process of using the current not exceed 25A.
2.Please double-confirm the wire you connect is right when installing this MOSFET Board, if you have any issue please contact us firstly, thanks!

Packing Included:
2 x Heated Bed Power Expansion Module (motherboard is not included)
2 x Connection cable for input signal

Product Features

  • This high power module is a general add-on heated bed power expansion module for 3D printer. Effective to resolve the hot bed power is too large and the load current problems. It compatible with Anet A8 and most 3d printers.
  • The heat bed power module can be used in both Chitu motherboard and other open 3D printer motherboards.
  • With this add-on module to your controller board, you can lead the maximum current up to 25A. If you need anything greater or equal to 15A this module is a must!
  • When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
  • Note: Under the premise of normal cooling, it works stably under I(Max)=25A, the current must NOT exceed 25A while in the work process.

Click Here For More Information

PTFE Tube Teflon PiPe to J-Head Hotend RepRap Rostock Bowden Extruder For 1.75mm Filament 3D Printer Part (2m, 2mmx3mm)


Specification:
Material: PTFE(common name:Teflon)
Used For: 1.75mm filament Bowden 3D Printer,Translucent
Temperature range (Degree F): -454 to 500.
Flame rating: UL-224 VW-1(UL-recognized).
Density: 2.15-2.20 g/cm3.
Size: 2mm*3mm, 2mm*4mm, 4mm*6mm
Length: 1Meter, 5Meter, 10Meter

Package:
1 x PTFE Tube

Product Features

  • Excellent resistant to acids, alkali and all kinds of organic solvents: ASTM D543.
  • High lubricating ability and non-stick.
  • Raw materials meet FDA requirements per FDA 21 CFR 177.1550 for use with food contact surfaces.
  • Excellent electric property and long life. Widely used in electronics, chemicals, medical and industrial.
  • Multiple sizes to your choice.

Visit The Website For More Information…

Zinnor 3D Printer Parts V6 J-Head Hotend Extruder Nozzle-0.4mm filament-1.75mm RepRap With 12V fan and 1 m PTFE tube Printer Accessories

Features:
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Specification:
Type: Bowden J-head
Thermister: 100K NTC

Package include:
1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor.
1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A
1 x One Meter long Bowden tubing 4mm OD 2mm ID
1 x PC4-M6 Straight Fitting

Note :
Dear friend,if you have any question about the product, please contact us before leaving the feedback, we will deal with the issue immediately and carefully until you are satisfied.

Product Features

  • ★[Length] :Metal J Head Hotend 1.75mm Filament 0.4mm Bowden Extruder Reprap 3D Printer
  • ★[Included]: NTC3950 Thermistor and 12V 40W Heater
  • ★[Material]: This 3D print head is equipped with a stainless steel all-metal heat insulation material without internal PTFE lining
  • ★[Parameters]: NTC 3950 Thermistor Parameters: Marin Thermistor Temperature Table
  • ★[Small size]: 1.25mmx2.0mm glass beads

Visit The Website For More Information…

AIKEER 14Pcs 3D Printer Nozzles M6 Brass Extruder Nozzle Print Heads (2Pcs 0.2mm + 6Pcs 0.4mm + 2Pcs 0.6mm + 2Pcs 0.8mm + 2Pcs 1.0mm) and 6Pcs 30MM Length Extruder 1.75MM Tube for MK8 Makerbot Reprap


AIKEER Accessories Series
Designed and Manufactured by AIKEER Only

Specification of Brass Nozzle:
Type: 0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.4mm

Specification of Extruder Tube:
Type: Nozzle Throat 
Compatibility: 3D Printer 
Outer Thread: M6 
Color: Silver
Material: Stainless Steel
Length: 30MM / 6/5 Inch
Filament Diameter: 1.75MM

Package
2 * 0.2mm extruder nozzle
6 * 0.4mm extruder nozzle
2 * 0.6mm extruder nozzle
2 * 0.8mm extruder nozzle
2 * 1.0mm extruder nozzle
6 * extruder nozzle 1.75MM Tube

Note: Compatible with all 1.75mm PLA ABS printer, works with Anet A8

Contact
If you have any problem with our products or service,
Please contact us first and we will provide the best solution for you soon.
Wish you a happy shopping.

Warranty
30 Days Money Back

Product Features

  • Compatibility: This Extruder Brass Nozzle Print Head is fit for MK8 Makerbot Reprap 3D Printers
  • Premium Material: Made of solid and durable high precision Brass material which is wear resistant, can provide a long service life
  • Size and Installation: The Input Diameter is 1.75mm and the Output Diameter is 0.4mm. It connected with M6 thread in external
  • Enough Quantity: The package includes 14 packs 3D printer nozzles, it’s enough quantity to replace the old or broken one
  • Warm Notice: These 3D printer heads are small parts, please keep them away from children to avoid swallow risk

Click Here For More Information