WINSINN 3D Printer Upgrade Bowden MK8 Extruder Hotend Kit Driver Feeder – For 1.75mm Nozzle Filament – TEVO Anet A8 RepRap Prusa i3 Makerbot Accessories Parts


►This Kit NOT Include Motor.

►Suitable For Remote and Short distance

►Extruder Compatible with TEVO, Anet A8, Prusa i3, And any FDM 3D Printer conversion to bowden

►Support: 1.75mm Filament

—————————————————————————————————————

Package include:
►1 x WINSINN Bowden MK8 Upgrade Kit (All Accessories show as Picture 2)

►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))

Product Features

  • This Kit NOT Include Motor.
  • This Bowden Extruder can replace MK8 Extruder
  • Suitable For Remote and Short distance
  • For 1.75mm Filament
  • Made by WINSINN

Click Here If You Need More Detailed Info…

Creality Supporting Rod Kits Upgrade Part for CR-10 CR-10S 3D Printers


Original Creality Parts
Supporting Rod Kits Upgrade
Upgrade for CR-10 / CR-10S 3D printers and increase stability during each printing session.

Compatible to:
CR-10
CR-10S

Incompatible to:
CR-10 S4
CR-10 S5

Specification
Condition: Brand New

Package Includes:
4 x Pull Rods
2 x L Pull Rod Connector
4 x Live Bolts M6*35
4 x M6 Nuts
2 x Screws M6*40
8 x M5*12
4 x M5T Nuts
1 x Tap
1 x T Tapping Wrench
1 x 3# Hexagon Wrench
1 x 8-10 Wrench

Y404

All product and company names are trademarksTM or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Product Features

  • Creality official supporting kit upgrade
  • Increase stability of each printing session
  • Made for CR-10, CR-10S 3D printers
  • NOT compatible with CR-10 S4, CR-10 S5

Visit The Website For More Information…

Creality 3D Printer Upgrade Parts Extension Cable Kit for CR-10/10S/CR-10 S4/CR-10 S5 Series 3D Printer Power Extension Cable

For Creality 3D 3D Printer Parts Extension Cable Kit for CR-10/10S/CR-10 400/CR-10 500 Series 3D Printer

Description:
– 100% factory supply !!!
– 100% brand new and of high quality.
– Length of the Extension cable: about 1m / 3.28ft
– Net Weight: about 401g

Package List:
1 x extension cable kit for CR-10/10S/CR-10 400/CR-10 500 series 3D printer

Product Features

  • For Creality 3D 3D Printer Parts Extension Cable Kit for CR-10/10S/CR-10 400/CR-10 500 Series 3D Printer
  • 100% factory supply !!!
  • 100% brand new and of high quality
  • Length of the Extension cable: about 1m / 3.28ft
  • Net Weight: about 401g

Visit The Website For More Information…

WINSINN 3D Printer J-head V6 Hotend Extruder Kit – High Speed Volcano Upgrade + Sensor Copper heater block 0.4mm Copper & Stainless steel Nozzle For PT100 1.75mm Filament

►This is The latest V6 kit, replacement parts is very easy, so you can easily upgrade your printer. High-quality stainless steel nozzle + copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))

 

—————————————————————————————————————

 

►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.

 

—————————————————————————————————————

 

►Sensor heater block is the 2016 new V6 heater block, it compatible with PT100 sensor, size 23*16*12mm

►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm

 

—————————————————————————————————————

 

Package include:
►1 x High quality copper + stainless steel 1.75mm-0.4mm nozzle
►1 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle
►1 x High quality Standard V6 + Volcano +Copper heater block
►1 x TC4 titanium alloy + 4.1mm Bore Heat Break
►1 x V6 Aluminum alloy Radiator + PC4-01 Pneumatic fittings
►1 x Heatsink Shroud + High Speed 3010 Fan 12V 0.1A 9000±RPM
►1 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
►2 x Allen wrench + 4 x Fan fixing screw

Product Features

  • Emergency Notice: Recently some customer feedback that V6 heat sink had the thread error, the heat sink in the kit is M6 thread, it can not be used. We are very sorry about this problem. This is our mistake. We apologize to all customers. If you have received a problem product, don’t worry. Contact us immediately, keep your product, we will re-send to you immediately for free. Thank you!
  • TC4 Titanium alloy Heatbreak – Ultra-low thermal conductivity, Make sure the printer stable operation.
  • 3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
  • High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
  • Suitable use for Remote and 1.75mm Filament. With Heatsink Shroud + High Speed 3010 Fan, the fan 0.1A 9000+-10%RPM

Click Here If You Need More Detailed Info…

[Gulfcoast Robotics] Aluminum Y Carriage Plate Upgrade for Anet A8 3D Printer

This product is an upgrade stock Y carriage plates on popular Anet A6 and A8 3D Printers. Plate is made of tempered aluminum alloy, brushed and anodized for perfect flatness and pleasing surface finish. This product will fix leveing issues that you might have on your Anet A6/ A8 3D Printers due to twist on original Y carriage plate.

Package contents:

1 x Y Carriage Anodized Aluminum Plate.

Product Features

  • Made for Anet A8 3D Printers, for Maker Select carriage plate, get this ASIN instead B07B251KBS
  • If you are looking for regular Prusa i3 carriage, get this part ASIN B07B2B7777
  • Very flat and stiff, will provide excellent reference for heated bed leveling
  • Has additional hole for 3 point level adjustment of heated bed
  • STL files for belt holders are here www.thingiverse.com/thing:2325206

Visit The Website For More Information…