Comgrow Ender-3X Creality 3D Printer Upgraded Version with Tempered Glass and Five Nozzles


Modeling Technology:FDM (Fused Deposition Modeling)
Printing Size:220*220*250mm
Machine Size:440*410*465mm
Package weight:8.6kg
Max Traveling Speed:180mm/s
Filament:1.75mm PLA
Input:AC 100-265V 50-60Hz
Output:DC 24V 15A 360W
Layer Thickness:0.1-0.4mm
Nozzle diameter:0.4mm
Precision:±0.1mm
File Format:STL,OBJ,G-Code
Working Mode:Online or SD offline
Max Nozzle Temperature:255℃
Max Hot bed Temperature:110℃
Resume print after power off: Yes

Product Features

  • Ender 3 Upgraded Version: This Ender-3X comes with a tempered glass, which makes models are easier removed. It also makes the hot bed more flat.
  • Advanced Technology: MK-10 extruder greatly reduces plugging risk and bad extrustion; V-Slot with POM wheel makes it move noiseless, smoothly and durable. Five more free nozzles included.
  • Easy and Quick Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
  • Resume Print: Ender 3X has the ability to resume prints even after a power outage or lapse occurs.
  • Strict Test: Strict testing for key components before delivery and life-time technical support.

Click Here For More Information

CHPOWER Creality CR-10S Mainboard Upgraded Replacement Controller Board Latest V2.1 Version Motherboard for Creality CR-10S S4 S5 3D Printer with Filament Monitoring Alarm

Direct replacement Motherboard for CR-10S, S400, S500 3D printer, not for CR-10 and Mini, please buy CR-10 board from our another listing: https://www.amazon.com/dp/B07B6HWVG2. Comes sealed in anti-static bag, with firmware already flashed, ready to plug and go! The default setting for this motherboard is for CR-10S300, please contact us via customer service e-mail if your 3D printer is CR-10S4 or S5, we will send you the upgraded firmware files. Just contact me if any questions.

Features:

-With special power chip, support 12V power input.
-Optimized circuit board, effectively solve the heating problem.
-Can work with E/Z/Y/X axis motor.
-USB interface, easy for operation.
-With 2018 Latest Firmware Creality V2.1
-Replacement board for CR-10 3D Printer.

Specifications:

-Suitable for: Creality 3D Printer
-Voltage Input: 12V
-Item Size: 10 * 7 * 2cm/ 3.9 * 2.7 * 0.8in
-Item Weight: 55g/ 1.9oz

Included:

1x Mainboard for Creality CR-10S S4 S5 3D Printer

Note:

1.Do not connect the mainboard or repalce any module inter-face operation(except SD and USB)when the power is on.

2. Please pay attention to the positive and negative of the power line and all the connecting ports before power on. Avoid to damage the motherboard.

3. Do not touch the motherboard with wet hands and keep it dry.

4. Please turn the power off in time in case of emergency.

4.Please e-mail to us if you need instructions or manual, we are here to help you in 24H.

Product Features

  • It is Original Creality 10s motherboard for CR-10S S4 S5 3D printer, not for CR-10 and Mini. With special power chip, supports 12V power input.
  • The circuit board is optimized by circuit, effectively solve the heating problem.
  • With USB interface, easy to operate, can work with E/Z/Y/X axis motors.
  • This CR-10 mainboard’s default setting is for CR-10S, please contact our service team for upgraded files if your printer is S4 or S5.
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer warranty on all parts. Buy with confidence

Visit The Website For More Information…

NovaMaker 3D Print Removal Tool with Sturdy Wooden Handle,Tool Kit for 3D Printer Spatula Palette Knife Painting Enhanced Version Pack of 3

Size: 3 various sizes
Weight: 0.05kg
Material: Stainless steel with wooden handle
Color: Brown

Package includes: 
3*3D Print Removal Tools

Directions for Use: 

♥To remove prints off the bed, work the edge of the tool under a corner of the print, approximately half way between the tip of the blade and the handle.

♥Next, use a sawing motion to get the tool under the rest of the print to separate it from the bed. Tilting or twisting the blade slightly will help speed up the lifting of the print.

♥If you cannot get the blade under the print to start, bring the left edge of the tool against a right-side corner of the print and twist the handle clockwise. Repeat until the corner lifts up enough to allow the blade to start getting under the print.

♥If the print is firmly stuck to the print bed, try pushing the tool so that the handle is closer to the print. This brings the thicker part of the blade (closest to the handle) under the object and acts as a wedge to help pry the part up. Wiggle the blade loose and repeat.

♥If the print is stuck too firmly to remove with the tool, you may need to slightly increase your starting nozzle elevation. The idea is to have the print stick firmly to the bed during printing, but still be removed with the tool.

Product Features

  • ✅3D print removal tool can help you easy get the prints off from the print bed.
  • ✅Set of 3 tools, rigid, functional, various sizes, various shapes, various purposes
  • ✅Rounded edge is safer and less likely to tear print bed tape.
  • ✅Excellent flexible flat top, stainless steel, break resistance.
  • ✅Stainless steel with sturdy wood handle for superior control.

Detailed Information available on our Homepage…

Sindoh 3DWOX 1 3D Printer (New Version)

◆ Specification
*Open Source Filament – PLA, ABS, ASA, PETG, PA, etc.
*Material Sindoh Filament – PLA, ABS
*Open Source Filament – Semi Auto Loading / Unloading
*Sindoh Filament – Auto Loading / Unloading
*Print Maximum Build Size – 210 x 200 x 195 mm
*Layer Thickness – 0.05 ~ 0.40 mm
*Print Head – Single Nozzle
*Nozzle Diameter – 0.40 mm
*Filament Diameter – 1.75 mm
*Print Bed Material – Flexible Metal Bed
* Bed Leveling – Semi Auto *Slicing SW – 3DWOX Desktop [Support File Types Stl, Ply, Obj, G-code (RepRap), Amf]
*Connectivity Options – USB 2.0 Device / 2.0 Host, Ethernet (1G), Wi-Fi
*5-inch Full Color Touch Screen
*LED Lamp Internally Installed
*Web Monitoring PC, Smartphone, Tablet
*Filter – HEPA Filter *Noise Level PLA – 45dB(A), ABS: 40dB(A)
*Printer Size (W x D x H) – 421 x 433 x 439 mm

◆ Certifications Specifications Met – CE, UL

◆ Warranty (Only applies to the users who purchase 3DWOX through an authorized seller on Amazon US)
1) Product – Up to 1 year from the product purchase date
2) Parts (Nozzle, Bed) – 90 days from the product purchase date For details, please visit our official 3DWOX website. (Please Google “3DWOX” to find our website) Note: You must register your product on our website for warranty. (Go to support & register your product) For more Information, Please follow our Twitter!

◆ Warranty Outside the US (Only applies to the users who purchased 3DWOX through an authorized seller on Amazon US) For those who purchased 3DWOX on Amazon US through international shipping and those who purchased 3DWOX on Amazon US and transported it to countries outside the US, we equally apply the warranty excluding the shipping fee.

Product Features

  • Heatable metal flexible bed
  • Offers hepa filter and fully enclosed structure for user safety
  • Open source filament mode now available

Click Here For More Information

[Gulfcoast Robotics] HEX Screw-In M3 EPCOS Thermistor for 3D Printer Extruder Hotend. Working Temperature up to 300C. 2017 Version.

New 2107 Version with working temperature up to 300C. Leads insulated with fiberglass, thermistor glued with 600C rated ceramic compound.

Our Screw In Thermistor uses most popular in reprap community EPCOS B57560G104F.Hex brass body with M3x0.5 threaded stud allows you to easily screw the thermistor into a M3 hole with zero chance of it falling out halfway through a print.Simply tap the existing hole on your hot end with a M3 tap and screw in the thermistor. The thermistor leads are insulated in fiberglass Tubing, 2 Pole JST Style Connector is attached to the leads ends. Connection cable with mating JST connector for connecting with 3D printer electronics is included. Thermistor glued in housing with high temperature 600C rated ceramic glue. Maximum allowed temperature for prolonged time is 300C.

Package contents:

1 x Hex Housed Modular Thermistor assembled with PTFE tubing, JST female connector and NTC EPCOS B57560G104F 100k Thermistor.

Product Features

  • Working temperature 300C and higher, fiberglass insulated leads
  • Thermistor glued in with 600C rated ceramic compound
  • Connector type: JST 2 pin connector, 2.5mm spacing.

Click Here For More Information