Genuine E3D Brass Volcano Nozzle – 3.00mm x 0.40mm (VOLCANO-NOZZLE-300-0400)

These nozzles are used with the Volcano block and packs to print at large layer heights and extremely high flow rates.

Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt speeds. We’ve also carefully crafted the internal geometry to optimise flow and throughput, as well as ensuring the nozzle tip is appropriately sized for flattening down extra wide printed traces.

E3D nozzles are easily identified by the number of hex flats drilled with dots.

Product Features

  • Genuine E3D Parts
  • 1 – 0.4mm High-performance brass nozzles for your Volcano HotEnd per Order
  • Super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints with the Volcano HotEnd PowerUp
  • These nozzles are immediately compatible with the Lulzbot Moarstruder
  • Many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano

Visit The Website For More Information…

Genuine E3D Brass Volcano Nozzle – 1.75mm x 0.80mm (VOLCANO-NOZZLE-175-0800)

These nozzles are used with the Volcano block and packs to print at large layer heights and extremely high flow rates.

Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights at extremely high flow rates. Volcano nozzles have extra long heated melt zones for ultimate filament melt speeds. We’ve also carefully crafted the internal geometry to optimise flow and throughput, as well as ensuring the nozzle tip is appropriately sized for flattening down extra wide printed traces.

E3D nozzles are easily identified by the number of hex flats drilled with dots.

Product Features

  • Genuine E3D Parts
  • 1 – 0.8mm High-performance brass nozzles for your Volcano HotEnd per Order
  • Super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints with the Volcano HotEnd PowerUp
  • These nozzles are immediately compatible with the Lulzbot Moarstruder
  • Many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano

Click Here For More Information

WINSINN 3D Printer J-head V6 Hotend Extruder Kit – High Speed Volcano Upgrade + Sensor Copper heater block 0.4mm Copper & Stainless steel Nozzle For PT100 1.75mm Filament

►This is The latest V6 kit, replacement parts is very easy, so you can easily upgrade your printer. High-quality stainless steel nozzle + copper heating block + TC4 titanium alloy, you can ultra-high temperature printing. Let’s try it :)))

 

—————————————————————————————————————

 

►TC4 titanium alloy: TC4 titanium alloy material composition is Ti-6Al-4V, (a + b) type titanium alloy, It has good mechanical properties, specific strength. TC4 strength sb = 1,012MPa, density g = 4.4 x 103, specific strength sb / g = 23.5, while the specific strength of alloy steel sb / g is less than 18. Titanium alloy has low thermal conductivity. Titanium alloy thermal conductivity 1/5 of steel , 1/13 of aluminum, 1/25 of copper , TC4 thermal conductivity l = 7.955W / m.K. The above data is only for reference.

 

—————————————————————————————————————

 

►Sensor heater block is the 2016 new V6 heater block, it compatible with PT100 sensor, size 23*16*12mm

►Copper heater block is The latest heating block, suitable for ultra-high temperature printing, size 22*16*11.5mm

 

—————————————————————————————————————

 

Package include:
►1 x High quality copper + stainless steel 1.75mm-0.4mm nozzle
►1 x High quality copper + stainless steel 1.75mm-0.4mm Volcano Sharp nozzle
►1 x High quality Standard V6 + Volcano +Copper heater block
►1 x TC4 titanium alloy + 4.1mm Bore Heat Break
►1 x V6 Aluminum alloy Radiator + PC4-01 Pneumatic fittings
►1 x Heatsink Shroud + High Speed 3010 Fan 12V 0.1A 9000±RPM
►1 x 12V 40W 1m Heater Cartridge Cable + NTC 100K 3950B Temperature sensor
►2 x Allen wrench + 4 x Fan fixing screw

Product Features

  • Emergency Notice: Recently some customer feedback that V6 heat sink had the thread error, the heat sink in the kit is M6 thread, it can not be used. We are very sorry about this problem. This is our mistake. We apologize to all customers. If you have received a problem product, don’t worry. Contact us immediately, keep your product, we will re-send to you immediately for free. Thank you!
  • TC4 Titanium alloy Heatbreak – Ultra-low thermal conductivity, Make sure the printer stable operation.
  • 3 Models of heater blocks, upgrade your printer, experience the latest high-temperature printer technology.
  • High quality International copper nozzle + stainless steel nozzle (1.75mm-0.4mm)
  • Suitable use for Remote and 1.75mm Filament. With Heatsink Shroud + High Speed 3010 Fan, the fan 0.1A 9000+-10%RPM

Click Here If You Need More Detailed Info…

Wangdd22 5PCS V6 Volcano Aluminium Heater Block for E3D Volvano Print Head Hot End Heating Block for 3D Printer Parts

Description:
Brand new and high quality
Volcano Heater block for 3D printer.
Material: Aluminum alloy.
Threaded Tube Hole: M6.
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Hole: M3.
Size: 20*20*11.6mm/0.79″*0.79″*0.47″

Package list:
5 x Volcano Heater block

Product Features

  • Material: Aluminum Alloy
  • size: 20mm x 20mm x 11.6mm
  • Threaded Tube Hole: M6
  • Heater Mounting Hole: 6mm diameter
  • Thermocouple Mounting Hole: M3

Visit The Website For More Information…

HITSAN Volcano Hot End Eruption Heater Block Heating Block For 3D Printer Accessories One Piece

Volcano hot end eruption heater block heating block for 3d printer accessoriesfeature: material: aluminum alloydimensions: 20mm x 20mm x 11.6mmthreaded tube hole: m6heater mounting hole: 6mm diameterset screw: m3 (included)thermocouple mounting hole: m3  package included:   1 x heater block

Product Features

  • Electronics
  • 3d printer & supplies>3d printer accessories
  • No returns except damage and defective case

Visit The Website For More Information…