YANGHX 3D Printing Filament PLA 1.75mm 2.85lbs Spool Dimensional Accuracy +/- 0.02mm White

Package included:
1 * 2.85lbs 3D Printing Printer Filaments

Material – PLA

Notes:

1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2. Due to personal measurement technique is different, there may be 1-3 cm error of the physical.Thank you!

Specification:
1. Product Name: PLA 3D Printer Filament
2. Product Color: White
3. Product Material: PLA
4. Product Diameter: 1.75mm+/-0.02mm
5. Product Length: 400m
6. Print Temperature: 210°C – 240°C
7. Softening Temperature: 60°C
8. Density: 1.25+/-0.05g/Cubic Centimeter
9. Melt Flow Rate: 5-7g/10min (190°C 2.16kg)
10. Heat Bed: No need
11. Spool-eye: 56mm Diameter
12. Bubble of Product: 100% No Bubble
13. Water Absorption: 0.5%
14. Tensile Strength: Up 60Mpa
15. Flexural Modulus: Up 60Mpa
16. Elongation at Break: Up 3.0%

Product Features

  • Density is small, when printing larger volume model lighter.
  • Cost-effective, can be processed in wide range temperature.
  • Applied to a variety of 3D printer, very compatible.
  • High strength, good hardness, very durable.

Check Out Our Website For Details…

Published by

3D Print Anything

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

Leave a Reply