Zomiee 5pcs 30MM Length Extruder 1.75mm Tube + 5pcs 0.4mm Brass Extruder Nozzle Print Heads + 5pcs Aluminum Heater Block Extruder Kit for MK8 M6 Makerbot Reprap 3D Printers

Specification of Brass Nozzle:
Type :0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm
Compatible: compatible with all 1.75mm PLA ABS printer, works with Anet A8.

Specification of Extruder Tube:
Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Aluminum Heater Block:
Material: Aluminum
Dimensions: 20*20*10mm(L*W*H)
Net Weight: 6g/pcs
Inner hole for install screw: M6 and M3 (heat pipe and thermocouple)

Package:
5 x MK8-0.4mm Brass Nozzle
5 x M6*30MM Extruder 1.75mm Tube
5 x MK8 Aluminum Heater Block

Product Features

  • [Throat Tube] – Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • [Nozzle] – 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • [MK8 Aluminum Heater Block] – Dimensions: 20*20*10mm(L*W*H); Material: Aluminum.
  • [Compatibility] – Suitable for Makerbot printer
  • [Combine Pack] – 5pcs 30MM Length Extruder 1.75mm Tube + 5pcs 0.4mm Brass Extruder Nozzle Print Head + 5pcs Aluminum Heater Block

Click Here If You Need More Detailed Info…

Published by

3D Print Anything

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “Zomiee 5pcs 30MM Length Extruder 1.75mm Tube + 5pcs 0.4mm Brass Extruder Nozzle Print Heads + 5pcs Aluminum Heater Block Extruder Kit for MK8 M6 Makerbot Reprap 3D Printers”

  1. Excellent product, good value for money and fits for … I bought these on a MakerBot Replicator 2 printer. The threaded rod is longer than the original so I had to change the print bed setup to allow for the longer distance. The nozzle is great. Clean and sharp, it deposits the material precisely. The heater block needed rework to work with the MakerBot Replicator 2 thermocouple. I had to drill and tap a new hole that isn’t so close to the heating element. The stud simply won’t clear if you already have one installed or if the corner of the hex…

Leave a Reply